Early Broncos came with two different styles of front turn signals. The only difference being the size of the lens. I will offer a light for each style. People have experienced different problems when trying to use LEDs in place of regular light bulbs. The most common problems are 1. they won't work under certain conditions; and 2. the turn signals flash EXTREMELY slow. To combat the second problem, see my Accessories page. The most likely cause of the first problem I listed is that the current flow through the LEDs is not being limited to flow in only one direction. I ran into this problem when I made my first set of LED lights. Each light I will sell has a diode placed in each each light's current path. This will eliminate any current flows in undesirable directions. Also, because these lights are made on fiberglass circuit board material and not sheet metal, each light will have a ground wire that will need to be attached to a good ground. I will supply a ring terminal for the ground wire. These lights are panels that are to be placed between the current light bucket and lens. I will supply an extra set of gaskets. However, I suggest that you replace the large pad when doing a set of large turn signals. Below is the description of each style I will offer.
STYLE 1 - '66-'68 | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | $60.00 per pair |
STYLE 2- '69-'77 | . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . | $70.00 per pair |
NOTE: These prices include new stainless mounting hardware, and the necessary gaskets. A set of simple step by step installation instructions will also be provided.
For new replacement lenses or additional gaskets, please to go The Accessories Page.